• <acronym id="ujgjn"><strong id="ujgjn"><xmp id="ujgjn"></xmp></strong></acronym>

      Language

      EN

      How it

      Works

      Sizing

      Formula

      4 Cycle Engines
      Airflow Ratings(CFM)
      RPM x   L x   Vol.Efficiency x   61.02
      3456
      Required Airflow ******(CFM)  
      Volumetric Efficiency
      Diesel Engines Naturally Aspirated 0.85
      Turbocharged 1.60
      Turbocharged-aftercooled 1.85
      Gasoline Engines Up to 2500 RPM 0.80
      2500 to 3000 RPM 0.75
      3000 to 4000 RPM 0.70

      CFM Formula

      4 Cycle Engines

      CFM = RPM x CID x Vol.efficiency
      3456

      CFM - Cubic Feet Per Minute
      CMM – Cubic Meters Per Minute
      L- Liters
      RPM - Revolutions Per Minute
      CID – Cubic Inch Displacement


      CMM Formula

      4 Cycle Engines

      CMM = RPM x L x Vol.efficiency
      2000

      Conversion Formula for Metric Displacement to CID:
      Cubic Centimeters (cm3) × 0.06102 =CID
      Displacement in Liters × 61.02=CID
      Conversion of CFM to CMM multiply by 0.0283

      Learn more

      Installation

      Guide

      The air precleaner is sized according to the engine airflow ratings and not according to the air intake pipe size.


      The air precleaner must not be mounted flush against any surface of the equipment as clearance is needed for the discharge of debris, dirts, dust. A minimum clearance of 5cm is recommended.


      For optimum results, vac valves, rubber valves on the filter canister, air intake system should be properly sealed/closed to prevent contaminated air from by-passing the precleaner.


      Hump hoses are strongly recommended for air precleaner installed in high vibration applications.



      Maintenance Instructions

      KleanAire precleaners are self-powered & self-cleaning and it virtually requires no maintenance. However, the discharge ports should be checked periodically to ensure that it is not plugged by debris, dirt, mud (especially in moist environment)

      • #01

        #01

        The air precleaner is sized according to the  engine airflow ratings and not according to the air intake pipe size.

      • #02

        #02

        The air precleaner must not be mounted flush against any surface of the equipment as clearance is needed for the discharge of debris, dirts, dust. A minimum clearance of 5 cm is  recommended.

      • #03

        #03

        For optimum results, vac valves, rubber valves  on the filter canister, air intake system should  be properly sealed/closed to prevent  contaminated air from by-passing the precleaner.

      • #04

        #04

        Hump hoses are strongly recommended for air precleaners installed in high vibration applications.

      PDF

      Download

      亚洲av综合色区无码一区
    1. <acronym id="ujgjn"><strong id="ujgjn"><xmp id="ujgjn"></xmp></strong></acronym>